scamozzi columns & scamozzi pillars |
| The beauty of plaster
without the drawbacks. Beats GRP too. |
|
-
 Interior
or exterior use. Beautiful
finish - not pitted like GRP.
Easy to cut to your exact size by trimming shaft.
Suitable
for DIY. Light enough to be
installed by one person.
Fit
in a fraction of the time. Pre-primed
surface requires only one coat of paint.
Durable
and shock-resistant - not brittle or fragile like plaster
or GRP.
Water/humidity
resistant.
|
|
| CLICK PRODUCT IMAGES
TO VIEW ENLARGEMENT |
 |
|
Scroll down to see products. These columns are not load bearing and there
is other important information you should read before you buy. Click
here to read it.
Allow 2 weeks for delivery - click
here for details.
Click here for tools
and adhesives.
NEED HELP? Phone 0121 449 8525
|
 |
| |
|
Cost & Quantity |
Add to cart |
|
 |
|
| * To reduce your overall height you cut away from the shaft. Please note that the shaft is straight on the bottom third and then tapers slightly from this point to the top. The minimum height quoted allows for the maximum that can be cut away from the shaft before the taper starts. |
|
|
 |
|
| * To reduce your overall height you cut away from the shaft. Please note that the shaft is straight on the bottom third and then tapers slightly from this point to the top. The minimum height quoted allows for the maximum that can be cut away from the shaft before the taper starts. Please also note that you can only cut away 7cm before you cut into the fluting on the shaft. |
|
|
 |
|
* To reduce your overall height you cut away from the shaft. Please note that the shaft is straight on the bottom third and then tapers slightly from this point to the top. The minimum height quoted allows for the maximum that can be cut away from the shaft before the taper starts.
|
|
|
 |
|
* To reduce your overall height you cut away from the shaft. Please note that the shaft is straight on the bottom third and then tapers slightly from this point to the top. The minimum height quoted allows for the maximum that can be cut away from the shaft before the taper starts. Please also note that you can only cut away 9.5cm before you cut into the fluting on the shaft.
|
|
|
 |
|
* To reduce your overall height you cut away from the shaft. Please note that the shaft is straight on the bottom third and then tapers slightly from this point to the top. The minimum height quoted allows for the maximum that can be cut away from the shaft before the taper starts.
|
|
|
 |
|
* To reduce your overall height you cut away from the shaft. Please note that the shaft is straight on the bottom third and then tapers slightly from this point to the top. The minimum height quoted allows for the maximum that can be cut away from the shaft before the taper starts. Please also note that you can only cut away 12cm before you cut into the fluting on the shaft.
|
|
|
