Covering An RSJ
Authentic looking RSJ covers. Indistinguishable from antique oak, but easy to install & maintain.
- Moulded from original antique oak timbers – every detail captured.
- Options for RSJ’s up to 310mm deep x 295mm wide.
- Cheaper than salvaged antique oak.
- Won’t move, bow, swell or rot.
- Handfinished in a variety of finishes.
- Lightweight and easy to cut, for easy, inexpensive installation.
- Durable and shock resistant.
- Water resistant. Fine in bathrooms.
- Material type: Polymer & Resin Mix.
- Allow 3 to 4 weeks for delivery.
NB. Sizes vary minimally from shown.
Help or samples? Call 0121 449 8525.
Request or download our brochures.
Colour Key
Left to right: Limed Oak, Mellow Oak, Light Oak, Mahogany, Jacobean Oak, Black.
NB. Image looks lighter than actual colours. Use as guide only. If needed, ask for sample.
Showing all 7 results
Great Beam – Full Length
The Great Beam is ‘U’ shaped and sits over your RSJ (see internal dimensions below – your RSJ, once clad in plasterboard, should not exceed these).
Length: 6300mm
Width: 300mm
Depth: 300mm
Internal Width: 200mm (min)
Internal Depth: 260mm
£981.25 – £1,030.30 inc VAT
Great Beam – 3/4 Length
The Great Beam is ‘U’ shaped and sits over your RSJ (see internal dimensions below – your RSJ, once clad in plasterboard, should not exceed these).
Length: 4800mm
Width: 300mm
Depth: 300mm
Internal width: 200mm (min)
Internal depth: 260mm
Great Beam – 1/2 Length
The Great Beam is ‘U’ shaped and sits over your RSJ (see internal dimensions below – your RSJ, once clad in plasterboard, should not exceed these).
Length: 3200mm
Width: 300mm
Depth: 300mm
Internal Width: 200mm (min)
Internal Depth: 260mm
Beam Cladding Plank – Full Length
You usually need two or three planks per RSJ. Each plank has a chamfer at one end. Run a plank vertically down each side of your RSJ with this chamfer pointing down. Cut these to the depth of your RSJ, plus 35mm (to allow for the thickness of the plank that will run on the underside). On the underside run a plank horizontally, with the chamfer cut away (you can use an offcut from a vertical).
Length: 5850mm
Width: 345mm
Thickness: 35mm
£273.40 – £287.10 inc VAT
Beam Cladding Plank – 3/4 Length
You usually need two or three planks per RSJ. Each plank has a chamfer at one end. Run a plank vertically down each side of your RSJ with this chamfer pointing down. Cut these to the depth of your RSJ, plus 35mm (to allow for the thickness of the plank that will run on the underside). On the underside run a plank horizontally, with the chamfer cut away (you can use an offcut from a vertical).
Length: 4000mm
Width: 345mm
Thickness: 35mm
Beam Cladding Plank – 1/2 Length
You usually need two or three planks per RSJ. Each plank has a chamfer at one end. Run a plank vertically down each side of your RSJ with this chamfer pointing down. Cut these to the depth of your RSJ, plus 35mm (to allow for the thickness of the plank that will run on the underside). On the underside run a plank horizontally, with the chamfer cut away (you can use an offcut from a vertical).
Length: 2925mm
Width: 345mm
Thickness: 35mm
Touch-up Kit
Includes filler, stain and wax.
Delivery
These products are moulded and hand stained to order. Please allow 28 days for delivery. If you need a quicker delivery, please call and we will try to help you.
Deliveries are made on weekdays between 9am and 6pm.
With most orders we use a specialist carrier who will contact you to liaise with you about the delivery date. When we use TNT as an alternative, we will contact you to advise delivery date.
Please note that surcharges apply to any product over 4.8m long. Please phone us for a quote.
Please note that surcharges apply to the following postcodes: AB, DD, IV, KW, PA, PH, BA, BH, BN, BR, BS, BT, CT, DA, DT, EX, GU, HS, IM, LD, LL, ME, NR, PL, PO, RH, RG, SA, SN, SO, SP, SY, TA, TN, TQ & TR. Please phone us for a quote.
When you receive your order, the driver won’t wait for you to check your goods. Please check the packaging. If there is any damage, sign as ‘damaged’ (even though the contents may not be).
Once the driver has left, check the contents immediately. Damage is infrequent, and we will replace any damaged goods, but you must notify us within 1 working day of receipt.
Request or download our brochures.
Need Some Help?
If you need any assistance in choosing the right product for your RSJ, please give us a call.
Installation Guides
Returns Policy For This Range
As this range is made to order, unfortunately we cannot accept returns. Please do therefore ensure that you are happy with the product before you order. If you have any queries, please call us.
