Description
The Beam Cladding Plank is perfect for covering RSJ’s. You usually need two or three planks per RSJ. Each plank has a chamfer at one end. Run a plank vertically down each side of your RSJ with this chamfer pointing down. Cut these to the depth of your RSJ, plus 35mm (to allow for the thickness of the plank that will run on the underside). On the underside run a plank horizontally, with the chamfer cut away (you can use an offcut from a vertical).
Length: 2925mm
Width: 345mm
Thickness: 35mm
Width of Chamfer: 45mm
Please note that the Light Oak colour is currently unavailable.
The staining process is done by hand-finishing and due to this and the undulations in the product, the shade and depth of colour may vary across each beam, and between batches. Whilst all reasonable steps are taken to try and match colour, this cannot be guaranteed.
Designed for use on ceilings and walls to reproduce traditional style typical of cottages of the Jacobean period. By using English Oak originals, the mouldings have the deep grain, knots and twists only found in this replica timber.
The sizes given are nominal only, and must not be considered accurate in view of the many natural blemishes within the oak original which were chosen particularly for these features. Unless otherwise stated, dimensions are quoted in millimetres.