Description
The Slatted Wall Panel 1 is a modern wall panel with narrow, evenly spaced slats that create clean vertical lines and add depth to a room. Its slim design means it can fit on top of existing skirting boards without projecting further than the skirting.
The 260cm length means that most standard-height walls can be covered vertically without a horizontal join. The panels have tongue-and-groove-style edges, helping to conceal the joins between each length making installation very easy.
Often used for feature walls, media walls, behind beds, in Entrance Halls, Lounges, Bedrooms, Home Offices and commercial interiors.
The panels come in a white pre-primed finish, ready for painting. We would recommend spray painting the panels where possible to achieve an even finish between the narrow slats.
For the same style in a pre-finished walnut effect, please see the Slatted Wall Panel 2. For a wider and deeper slatted design, please see Wall Texture 5.
For more similar modern wall-panel designs, please view our 3D Wall Panels range.
In the Room Set image, the Slatted Wall Panel 1 is used with the Classic Cornice 43.
Made from a lightweight high-grade polymer, the panels come pre-primed and are ready to fit and paint.
How many panels will I need?
Each panel is 12.2cm wide and provides approximately 11.5cm of wall coverage once the panels are joined together.
There is a minimum order quantity of six panels. Accurately measure the width and height of the area before ordering and allow extra material for cuts and wastage.
How do I install the panels?
The panels are installed next to each other using their concealed joining edges. Please see our 3D Wall Panel Installation Guide for full fitting instructions.
Product dimensions
Panel width: 12.2cm
Panel length: 260cm
Projection: 1.2cm
Width of slats: 1.1cm
Wall coverage per panel: approximately 11.5cm
Minimum order: 6 panels
Adhesive coverage:
Kovex No.1 Adhesive = 1 tube will cover approximately 4 panels.
Kovex No.2 Adhesive = 1 tube will cover approximately 4 panels.
