Description
The Dado Height MDF T&G Panel is a Tongue and Groove Panel Sheet, pre-cut to the right height for doing Half Height Wall Panelling. Commonly used in Bathrooms, Hallways, Dinning Rooms where practicality meets style. This Panel is pre-cut to a length of 81.cm, the width of the panel is 60cm.
It is made from Moisture Resistant MDF which means that it is suitable for bathrooms and toilets. This product is also used in Hallways, Dinning Rooms.
The Tongue and Groove Panels are supplied in 60cm widths to make them easier to handle. They simply slot into each other thanks to the tongue and groove design which makes installation even faster.
For Installation, use adhesives for the most seamless finish, you can use a pin gun and screws for installation if you wish – there would be more filling and finishing required if using mechanical fixings.
A universal design which works well with nearly all interior styles, this can be painted in any colour and paint type whether it be Matt, Satin or Gloss. We would recommend a Good Quality paint for installation. If using Farrow and Ball paint – whilst it will work fine on the product, it tends to be a softer paint so a lacquer may be required for protection, especially as this Panelling kit is used mostly in high traffic areas. To achieve the smoothest finish, a light sand is required to remove any rough texture on the product.
This Material can be simply cut with a Panel saw or a circular saw.
Adhesive Coverage:
Kovex No.1 or No.2 Adhesive = 1 tube per 8 panels
